Heavy Haul Loads In Wyoming
Finding heavy heavy haul and oversized loads in Wyoming has never been easier. VeriTread offers the most USA and Canadian shipper direct freight on our load board than anyone else. We have hundreds of open deck loads including flatbed, step deck, lowboy, and RGN.
We work with thousands of shippers every month needing oversize load transport, heavy equipment hauling, farm equipment transport, hot shot trucking, partial load shipping, drive away services, specialized heavy haul transport, and more. VeriTread will bring you thousands of opportunities to build a national or local customer base, encourage repeat business, and increase your overall efficiency
When you use VeriTread’s load board for oversize loads, you get access to the information you need to make the best decisions for your business. Our patented technology gives integrated dimensions, machinery weights, direct communication with shippers, trailer and permit requirements. This creates a more predictable carrier experience by clearly identifying all of the industry secrets and insider knowledge required to efficiently transport large items.
DOT & Wyoming State Heavy Oversize Permit Information
PERMITS: Wyoming oversize permits are obtained from Ports of Entry by the driver (see phone list at bottom of this page). Driver must call ahead to the Port/Scale at least one hour prior to arrival and obtain a clearance number. Failure to do this will result in up to a $500 fine and 24-hour shutdown. The permit is usually valid for one day or one trip.
OPERATING TIME: One-half hour before sunrise to one-half hour after sunset, including weekends, plus loads not exceeding 10′ wide, and all other dimensions are legal, may travel at night on Interstate highways only with proper lighting.
RESTRICTED TRAVEL: Holiday travel is usually allowed for loads not requiring escorts, but Ports of Entry are not open, so check with the Port on pre-ordering permit if you wish to run on the holiday.
PLEASE TAKE NOTE. VeriTread is not a permit service nor do we answer permit and escort requirements. States are constantly changing their rules and regulations, so always read your permits and provision sheets carefully. Due to these changes, VeriTread can not guarantee the accuracy of the provided information. Please use the link to the state's official DOT page to verify all oversize and over dimensional permitting information with your respective state.
60′ semi-trailer and load (including any overhang)
80,000 – 117,000 Gross
Single – 20,000
Tandem – 36,000
Tridem – 42,000 (8’1″ to 8’5″ of spacing) 36,000 with 8′; 42,500 pounds with greater than 8’6″ spacings; and 43,500 with greater than 10′ of spacings
ROUTINE PERMIT LIMITS:
Single – 25,000
Tandem – 55,000
Tridem – 65,000
Register for up to 117,000 pounds to permit for that much or more
Loads in excess of these dimensions are considered as superloads.
On Interstate Highways:
At discretion of WY Highway Patrol Overhang: Over 25′ rear – 1 escort
Over 14′ – 1 escort (Additional escorts may be required by the Highway Patrol for extreme widths.)
As determined by WY Highway Patrol (not usually required) On 2-Lane Highways:
Over 109′ – 2 escorts
Over 13’11” or if load extends past center lane at any time – 2 escorts