Finding heavy heavy haul and oversized loads in Wisconsin has never been easier.  VeriTread offers the most USA and Canadian shipper direct freight on our load board than anyone else.  We have hundreds of open deck loads including flatbed, step deck, lowboy, and RGN.

We work with thousands of shippers every month needing oversize load transport, heavy equipment hauling, farm equipment transport, hot shot trucking, partial load shipping, drive away services, specialized heavy haul transport, and more. VeriTread will bring you thousands of opportunities to build a national or local customer base, encourage repeat business, and increase your overall efficiency

When you use VeriTread’s load board for oversize loads, you get access to the information you need to make the best decisions for your business. Our patented technology gives integrated dimensions, machinery weights, direct communication with shippers, trailer and permit requirements. This creates a more predictable carrier experience by clearly identifying all of the industry secrets and insider knowledge required to efficiently transport large items.


DOT & Wisconsin State Heavy Oversize Permit Information

PERMITS: Wisconsin oversize permits are valid for fourteen consecutive days. Must have permit prior to entering the state.
OPERATING TIME: Loads not exceeding 12′ wide, 13’6″ high or 100′ long may run 24/7, except between 4:00PM to 11:00PM on Sunday, and between 4:00 P.M. to 11:00 P.M. between the fourth Sunday in May and Labor Day. Greater than these dimensions may not run during hours of darkness, not from Noon on Saturday until sunrise on Monday, and not between 4:00 P.M. to 11:00 P.M. between the fourth Sunday in May and Labor Day. Overweight only can travel 24/7, including weekends and holidays, unless otherwise stated on the permit.
RESTRICTED TRAVEL: Travel is restricted on major holidays and holiday weekends, with some variations according to size.

PLEASE TAKE NOTE.  VeriTread is not a permit service nor do we answer permit and escort requirements.  States are constantly changing their rules and regulations, so always read your permits and provision sheets carefully. Due to these changes, VeriTread can not guarantee the accuracy of the provided information.  Please use the link to the state's official DOT page to verify all oversize and over dimensional permitting information with your respective state.



53′ semi-trailer on designated highways (provided kingpin to center of rear tandem or to center of last axle of a Tridem does not exceed 43′)
48′ semi-trailer and 75′ overall on other roads






80,000 Gross
Single – 20,000
Tandem – 34,000
Tridem – 42,000 (43,000 with 9′ of spacings)



No set limit




Depends on routes


Single – 30,000 (with 4 tires)
Tandem – 65,000
Tridem – 81,000
Loads exceeding 16′ or 150,000 pounds are considered as Super Loads.



Usually not required


Over 15′ – 1 escort


Usually not required, depends on routes



“Oversize Load” signs required when vehicle/load exceeds 10′ wide or is overlength. They must be lit up to run at night. Flags (18″ square) are required at front and rear corners of overwidth loads, and at the widest point of any load which is more than 4″ wider than the vehicle or the front or rear corners of the load. When overlength, a single flag shall be fastened at the extreme rear of the load if the overlength or projecting portion is 2′ wide or less, or 2 flags if over 2′ wide.

Find Heavy Haul Loads Near You

VeriTread has you covered with oversize, overweight, and specialized loads

If you’re an open deck transport provider, you’re well aware that you need to look for a special type of load to haul. VeriTread’s load board has everything from Lowboy & RGN to flatbed freight that you won’t find anywhere else. We go the extra mile, with advanced search and filter capabilities that instantly connect you with the best paying freight in the industry. Login or Sign Up and let VeriTread help you grow your business and take the headache out of heavy haul.