Excavator side shot

Find Heavy Haul Loads In Oklahoma

VeriTread makes it easy to find Heavy Haul loads in Oklahoma.

Heavy Haul Loads In Oklahoma

Finding heavy heavy haul and oversized loads in Oklahoma has never been easier.  VeriTread offers the most USA and Canadian shipper direct freight on our load board than anyone else.  We have hundreds of open deck loads including flatbed, step deck, lowboy, and RGN.

We work with thousands of shippers every month needing oversize load transport, heavy equipment hauling, farm equipment transport, hot shot trucking, partial load shipping, drive away services, specialized heavy haul transport, and more. VeriTread will bring you thousands of opportunities to build a national or local customer base, encourage repeat business, and increase your overall efficiency

When you use VeriTread’s load board for oversize loads, you get access to the information you need to make the best decisions for your business. Our patented technology gives integrated dimensions, machinery weights, direct communication with shippers, trailer and permit requirements. This creates a more predictable carrier experience by clearly identifying all of the industry secrets and insider knowledge required to efficiently transport large items.

freight list

DOT & Oklahoma State Heavy Oversize Permit Information

PERMITS: Oklahoma oversize permits are valid for three days. Must have permit prior to entering the state.
OPERATING TIME: One-half hour before sunrise to one-half hour after sunset seven days a week. Overweight only can have continuous travel, but must be requested when ordering permit.
RESTRICTED TRAVEL: Oversize load movements are not allowed on the Interstate system through Cleveland, Oklahoma and Tulsa counties between 7:00 a.m. to 9:00 a.m. and 3:30 p.m. – 6:30 p.m. Monday through Friday (does not apply to O/W only). No permit travel allowed on major holidays.
OKLAHOMA TURNPIKES: Loads up to 9’6″ wide are permitted without requiring a Pike Pass. Loads over 9’6″ wide up to 11’6″ wide (and up to 13’6″ wide on Cherokee Turnpike only) need a Pike Pass reference number for permitting. Maximum weight for the turnpikes is 108,000 pounds. Weight is paid for on the state permit; the turnpike does not charge extra above the usual per axle charge.

PLEASE TAKE NOTE.  VeriTread is not a permit service nor do we answer permit and escort requirements.  States are constantly changing their rules and regulations, so always read your permits and provision sheets carefully. Due to these changes, VeriTread can not guarantee the accuracy of the provided information.  Please use the link to the state's official DOT page to verify all oversize and over dimensional permitting information with your respective state.



59’6″ semitrailer and load is legal on Oklahoma’s “U.S. Defense Highway System” which includes all Interstate routes and many of the main U.S. Highways
53′ semitrailer and load on other routes


8’6″ (8′ on any highway having a surface width of less than 20 feet)




80,000 Gross on Interstate
90,000 on non-Interstate routes (with legal tandem and tridem weights)
Single – 20,000
Tandem – 34,000
Tridem – 42,000



No set maximum




Depends on routes


Single – 20,000
Tandem – 40,000 (with at least 4’3″ axle spacing) or 39,000 (less than 4’3″ spacing)
Tridem – 60,000 (57,000 with 4’2″ axle spacings)
Quad – 65,000
Steer Axle – 15,000 (With minimum spacing of 15′ steer to first drive axle). Requests for more than 15,000 pounds on steer axle have to go to bridge engineering for approval, taking an extra day or two.



Over 80′ on 2-lane highways – 1 escort
Over 100′ on 2-lane highways – 2 escorts


Over 12′ on all highways – 1 escort
Over 14′ on two-lane highways or over 16′ on multi-lane highways – 2 escorts


Over 15’8″ – 2 escorts on all highways; and “All public utilities and railroads along the route must be contacted in advance of the move by the permittee.”

veritread carrier app


“Oversize Load” signs are required on front of tractor and rear of load or trailer (whichever extends the farthest) on all oversized loads moving under permit. They are also required on two-lane highways when the load exceeds 59-1/2 feet in length. Flags are required at the widest point of any oversize load. Rear overhang of 4 feet or more must be flagged.

Find Heavy Haul Loads Near You

VeriTread has you covered with oversize, overweight, and specialized loads
If you’re an open deck transport provider, you’re well aware that you need to look for a special type of load to haul. VeriTread’s load board has everything from Lowboy & RGN to flatbed freight that you won’t find anywhere else. We go the extra mile, with advanced search and filter capabilities that instantly connect you with the best paying freight in the industry. Login or Sign Up and let VeriTread help you grow your business and take the headache out of heavy haul.