Heavy Haul Loads In Arizona
Finding heavy heavy haul and oversized loads in Arizona has never been easier. VeriTread offers the most USA and Canadian shipper direct freight on our load board than anyone else. We have hundreds of open deck loads including flatbed, step deck, lowboy, and RGN.
We work with thousands of shippers every month needing oversize load transport, heavy equipment hauling, farm equipment transport, hot shot trucking, partial load shipping, drive away services, specialized heavy haul transport, and more. VeriTread will bring you thousands of opportunities to build a national or local customer base, encourage repeat business, and increase your overall efficiency
When you use VeriTread’s load board for oversize loads, you get access to the information you need to make the best decisions for your business. Our patented technology gives integrated dimensions, machinery weights, direct communication with shippers, trailer and permit requirements. This creates a more predictable carrier experience by clearly identifying all of the industry secrets and insider knowledge required to efficiently transport large items.
DOT & Arizona State Heavy Oversize Permit Information
PERMITS: Arizona oversize permits are valid for four days. Drivers have the option of purchasing permits at most Ports of Entry.
OPERATING TIME: Daylight hours, (one-half hour before sunrise to one-half hour after sunset). Loads/vehicles not over 10′ wide or 14′-6″ high or not over 10′ rear overhang are allowed continuous travel. Loads not over 16′ wide, 16′ high, 120′ long and 250,000 pounds may travel on Interstate and specified state routes at night, from 3:00 am to 12:00 noon on weekends (except on holiday weekends and in curfew areas), but this must be requested when permit is ordered and must be stated on the permit. Note that loads over 11′ wide will be required to have one escort to travel from 3 a.m. to noon on weekends, and loads 15′ high and over will need escort with height pole.
RESTRICTED TRAVEL: No OD or OW loads allowed on I-17, I-10 and SR 60 within city limits of greater Phoenix area, or I-10 or I-19 within city limits of greater Tucson area between hours of 7:00 am – 9:00 am and 4:00 pm – 6:00 pm weekdays. Local “Courtesy Permit”/route approval is required for OD travel within Phoenix and Tucson.
PLEASE TAKE NOTE. VeriTread is not a permit service nor do we answer permit and escort requirements. States are constantly changing their rules and regulations, so always read your permits and provision sheets carefully. Due to these changes, VeriTread can not guarantee the accuracy of the provided information. Please use the link to the state's official DOT page to verify all oversize and over dimensional permitting information with your respective state.
57′ trailer on Interstate
Non-designated roads, 65′ overall for over 53′ semi-trailer
Note: Overhang 3′ front, 6′ rear.
Single – 20,000
Tandem – 34,000
Tridem – 42,000
ROUTINE PERMIT LIMITS:
Tandem – 46,000*
Tridem – 51,450–53,974*
Single – 28,000
Note: A “Class C Tridem Permit” can now be obtained to allow 59,168 pounds at 9′ of Tridem axle spacing (57,960 at 8′, 60,000 at 10′). However, this is only for travel on Interstates 10, 19 and 40, and for the portions of SR68 and US93 connecting I-40 and the Nevada line. Any other (including detour) routes will disqualify you. Over 14′ wide, 16′ high, 120′ long and 250,000 requires a “Class C”. A route survey may be required.
SIGNS, FLAGS & LIGHTS:
All over-width vehicles or loads exceeding 9′ in width shall display “Oversize Load” signs. All over-width loads and vehicles must be flagged with red flags 12″ square or larger on extremities. Any front or rear overhang must be flagged or lighted. Up to 10′ overhang may travel at night, but must be lit and flagged. There are no sign or flag requirements for over-height only or overweight only loads.
Note on Overweight Permits in AZ: Arizona scales expect permit weights to be very close to actual weights and dimensions. You can buy the permit at the scales to avoid problems, or else make sure you are ordering accurate weights.